Hypertherm Powermax45 SYNC
Hypertherm Powermax45 SYNC
- Ships by UPS Ground
- GFHQ CNC Com Cable included
- Questions? Talk to Garage Fab HQ
Shipping & pickup
Machines ship from our closest HQ (West Coast HQ in Las Vegas, NV or East Coast HQ in Clarksville, TN), priced from your ZIP, or you can pick up free at either one. Choose shipping or pickup above and it is added to your cart. Shipping is an estimate that we confirm after your order. START kits ship crated (pick up at your local terminal, or delivery to a business or home); picked-up kits come unassembled on a pallet, or pre-assembled and tested for $749.99.
Plasma cutters ship by UPS Ground. Accessories ship by parcel, priced by size. Ordering them with a machine we ship to you? We pack them in at no extra cost (not with pickup orders).
Need help choosing?
See every line side by side on our START vs CORE vs PRO comparison, or contact us and we'll help you pick the right machine for your shop.
Hypertherm quality, set up for your plasma table. This system (Hypertherm part #088580) pairs the Powermax45 SYNC power supply, with a built-in CPC port and voltage divider for CNC, and a 25 ft 180° SmartSYNC machine torch. Like every plasma cutter from Garage Fab HQ, it comes with our GFHQ CNC Com Cable, so you can connect it to your table controller right away.
The SYNC platform takes the guesswork out of setup. Each single-piece cartridge has an RFID chip, and the torch reads it and sets the correct amperage and mode automatically, with no dials to get wrong. When a cartridge is worn out, the system tells you. Hypertherm rates cartridge life at up to 5 times longer than standard consumables, and the Powermax line is known for running for decades in the field.
Cut Capacity (mild steel)
- Recommended: 5/8" at 20 inches per minute
- Severance: 1-1/8" at 5 inches per minute
- Pierce: 1/2" (with automatic torch height control)
Key Features
- CPC port and voltage divider for CNC and torch height control
- RFID SmartSYNC torch and cartridges set the amperage and process automatically
- Single-piece cartridges swap in seconds and eliminate part mix-ups
- End-of-life cartridge detection
- Also cuts, marks and gouges with the right cartridge
- SpringStart technology for consistent, reliable arc starts
- 90% electrical efficiency
What's in the Box
- Powermax45 SYNC power supply with CPC port and voltage divider
- GFHQ CNC Com Cable (included free with every GFHQ plasma cutter)
- 180° SmartSYNC machine torch with 25 ft lead
- Work cable with ground clamp
- Starter cartridge
- Operator's guide
Specifications
- Input: 200–240V, single phase, 50/60 Hz
- Input current: 39A at 200V / 32A at 240V
- Output: 9–45A
- Duty cycle: 50% at 45A; 60% at 41A; 100% at 32A
- Air: clean, dry, oil-free air at 6.7 scfm @ 90 psi
- Dimensions: 17.4" D × 6.8" W × 14.1" H
- Weight: about 31 lb with a 20 ft torch
- Generator: 12.5 kVA (10 kW) for full 45A output
- Warranty: 6 years on the power supply, 1 year on the torch
Good to Know
- Use clean, dry air. Moisture and oil in the air line shorten cartridge life.
- This is the 200–240V single-phase model.