PRO CNC Plate Plasma – Water Pan
- Freight, hotshot or free pickup Prepped for transport, priced from your ZIP, or pick it up free at either HQ.
- 1-year warranty Chassis, mechanical parts, electronics and motors. Extended coverage available.
- Free self-serve support Build guides, how-tos and Shop Talk. Live 1-on-1 help can be booked.
The GFHQ PRO CNC Plate Plasma – Water Pan is our top-tier CNC plate plasma, built for production fabrication. It takes our fully welded frame design and upgrades it with dual 20 mm linear rails on X and Y, EtherCAT servo drives standard on every axis and more capacity for bigger, heavier work. It's designed and built by Garage Fab HQ, and every machine is built to order with a 6–8 week lead time. Prefer a dry table? Choose Downdraft on this page.
Choose Your Plasma Cutter
Add a cutter from us and it comes with the GFHQ CNC Com Cable, ready to connect to your table: Everlast 62i, 82i or 102i, or Hypertherm 45, 65 or 85 SYNC. Already have a CNC-ready cutter? Choose None.
Who It's For
- Production shops running parts all day, every day
- Fabricators who need EtherCAT servo speed and linear rail accuracy
- Shops cutting heavier plate and bigger jobs
- CORE owners ready to step up
Plasma or other CNC knowledge and experience is highly recommended. The included free design software and the GFHQ Design Lab help you get the most out of it.
Arrives Fully Built
- We build the whole machine. Garage Fab HQ fully builds, assembles and tests every PRO machine before it ships or you pick it up. Lead time is 6–8 weeks.
- You install it and start cutting. It may need some adjustments and tuning after installation, but you're up and running much quicker than with a kit.
Frame
- Fully welded heavy-duty steel tubing frame
- Flat-top table design, so you can load material from any direction
- Heavy-duty adjustable caster wheels, so you can move it and then level it where you need it
- More capacity for heavier plate and bigger jobs
Your Choice of Table
- Water pan: catches sparks, cools parts and keeps smoke and dust down
- Downdraft: pulls smoke and fumes down and away from the operator. Great for HVAC work and jobs that can't be contaminated by water
Motion
- X and Y: dual 20 mm linear rails, direct drive rack and pinion with 5:1 gear reduction, driven by 1000 W EtherCAT servos
- Z: ball screw drive with a 400 W EtherCAT servo for accurate, repeatable torch height
Control and Software
- MyPlasm PRO controller
- USB drive with MyPlasm, QCAD and Inkscape
Sizes
- 4' x 4': 50 in. x 50 in. actual cut area
- 4' x 8': 50 in. x 98 in. actual cut area
- 4' x 10': 50 in. x 122 in. actual cut area
- 5' x 5': 62 in. x 62 in. actual cut area
- 5' x 10': 62 in. x 122 in. actual cut area
- 6' x 12': 74 in. x 146 in. actual cut area
Choose Your Computer
- USB (bring your own PC): install from the included USB drive
- Laptop (pre-programmed): arrives set up and ready to run
- PC Kit (pre-programmed): mini PC with monitor, keyboard and mouse, set up and ready to run
Warranty
1 year on the chassis and mechanical parts, and 1 year on electronics and motors. Extended coverage is available: 2 years for $999.99 or 3 years for $1,199.99, added from this page. Plasma cutters carry their maker's own warranty: register and make any claims directly with the maker. Full warranty details
Be One of Our First Owners
Want more information? Call us at (833) 856-GFHQ or contact our sales team. Customers who buy one of our first machines get warranty coverage plus on-site setup and training.
Support
Free self-serve help that keeps growing: build guides, how-tos and tips in GFHQ Shop Talk, the GFHQ Design Lab and on YouTube at @garagefabhq, plus email help at tech@garagefabhq.com. Want live 1-on-1 help by phone, video or remote login? Book a session through Live Tech Support.
Freight, Hotshot or Free Pickup
PRO machines have welded frames, so they aren't crated. We prep each machine for transport and send it by freight or a hotshot delivery service from our closest HQ (West Coast HQ in Las Vegas, NV or East Coast HQ in Clarksville, TN), or you can pick it up free at either HQ. Pick it up free and pay in full online, or buy the machine now and we invoice freight or hotshot separately before it ships. Want shipping in one purchase? Get a final shipping quote from a sales rep in the Shipping tab. Shipping & Logistics details
Motion
- X / Y guides
- Dual 20 mm linear rails
- X / Y drive
- Direct drive rack and pinion
- Gear reduction
- 5:1, on the X and Y drives
- X / Y motors
- 1000 W EtherCAT servo drives
- Z drive
- Ball screw
- Z motor
- 400 W EtherCAT servo drive
Frame
- Construction
- Fully welded heavy-duty steel tubing
- Table design
- Flat top, loads from any direction
- Casters
- Heavy-duty adjustable caster wheels
- Capacity
- Built for heavier plate and bigger jobs
- Lead time
- 6–8 weeks, built to order
- Build
- Fully assembled and tested by Garage Fab HQ before it ships or is picked up
- Setup
- May need some adjustments and tuning after installation
Table
- Table type
- Water pan
Control and software
- Controller
- MyPlasm PRO
- Software
- USB drive with MyPlasm, QCAD and Inkscape
- Computer
- Your own PC, or add a pre-programmed laptop or PC kit
Plasma cutter
- Choose
- None (bring your own), Everlast 62i, 82i or 102i, or Hypertherm 45, 65 or 85 SYNC
- CNC cable
- GFHQ CNC Com Cable included with a cutter bought from us
- Cutter warranty
- The cutter maker's own warranty
Power and air
- Plasma cutter
- Starting point, Everlast PowerPlasma 62i: 240V single-phase input. Breaker size per the cutter's manual. Confirm your final cutter choice, as power needs change with the model
- GFHQ servo control box
- 240V single-phase input power. Have your electrician confirm the circuit and breaker
- Computer
- 1 x 120V 20A circuit
- Air compressor
- Comes in 120V or 240V models, so plan a circuit to match yours
- Compressed air
- Starting point, Everlast 62i: 6 CFM at 90 PSI supply, 75 PSI operating, at least a 30 gal. tank. Check the rating of your final cutter
- Before you wire
- Have your electrician confirm the circuits and breakers your shop needs for your final setup
What you'll need (not included)
- Air compressor
- Sized for your plasma cutter (Everlast 62i: 6 CFM at 90 PSI, 30 gal. tank or larger)
- Air filter
- Inline filter and water separator for clean, dry air
- Power
- Circuits as listed under Power and air, including 240V single-phase for the servo control box, confirmed with your electrician
- Computer
- Your own, if you pick the USB option
- Plasma cutter
- Your own, if you pick None
Sizes
- Available sizes
- 4' x 4', 4' x 8', 4' x 10', 5' x 5', 5' x 10' and 6' x 12'
- Actual cut area
- 2 in. larger than the advertised size in X and Y. For example, a 4' x 4' cuts 50 in. x 50 in.
What's in the box
- Fully welded heavy-duty steel tubing frame with heavy-duty adjustable casters
- Water pan
- Dual 20 mm linear rails with rack and pinion and 5:1 gear reduction on X and Y, ball-screw Z axis
- 1000 W EtherCAT servos on X and Y, 400 W EtherCAT servo on Z
- MyPlasm PRO control system
- USB drive: MyPlasm, QCAD and Inkscape
Actual cut area
- 4' x 4'
- 50 in. x 50 in.
- 4' x 8'
- 50 in. x 98 in.
- 4' x 10'
- 50 in. x 122 in.
- 5' x 5'
- 62 in. x 62 in.
- 5' x 10'
- 62 in. x 122 in.
- 6' x 12'
- 74 in. x 146 in.
Footprint and weight
- Footprint and weight
- Coming soon
PRO machines have welded frames, so they aren't crated. We prep each machine for transport and ship it by freight or a hotshot delivery service from our closest HQ: Las Vegas, NV or Clarksville, TN. Enter your ZIP below to see an estimate. You can buy the machine now and we invoice freight or hotshot separately before it ships, or ask a sales rep for a final quote to package shipping into one purchase.
Every PRO machine is built to order with a 6–8 week lead time, then fully assembled and tested before it ships. It may need some adjustments and tuning after installation.
Prefer to pick it up? Choose free pickup at either HQ, and we'll contact you to schedule it.
Shipping estimate
Enter your ZIP for a delivery estimate. Two ways to buy: order the machine now and we invoice freight or hotshot separately before it ships, or get a final shipping quote from a sales rep below to package shipping into one purchase. Free pickup can be bought in full online.
Ships uncrated on its welded frame. It can be forklifted by the frame, and it rolls on wheel dollies for enclosed-trailer hauling.
ZIP not working? Enter your driving miles
Estimate only. Final prices can vary with current market rates, fuel surcharges and unique delivery requirements. Free pickup is always available at Las Vegas, NV or Clarksville, TN.
No reviews yet. Own this machine? We'd love to hear how it's working in your shop.
Downloads
- Assembly and how-to manual (coming soon)
Learn and get help
- GFHQ Design Lab: designs and files
- GFHQ Shop Talk: tips, how-tos and community
- YouTube @garagefabhq: build and setup videos
- Live Tech Support: book a 1-on-1 session
Warranty & support
1 year on the chassis and mechanical parts, and 1 year on electronics and motors, against normal wear and tear or design flaws. Extended coverage is available: 2 years for $999.99 or 3 years for $1,199.99.
Coverage starts once delivery is confirmed with no shipping damage reported. It doesn't cover modifications, overuse or damage from abnormal conditions. To make a claim, email info@garagefabhq.com for a return form before sending anything back.
Plasma cutters carry their maker's own warranty: register and make any claims directly with the maker.
Support: free self-serve help that keeps growing, with build guides, how-tos and tips in GFHQ Shop Talk, the GFHQ Design Lab and on YouTube at @garagefabhq, plus email help at tech@garagefabhq.com. Want live 1-on-1 help by phone, video or remote login? Book a session on our Live Tech Support page.
