{"product_id":"hypertherm-powermax85-sync-cnc-plasma-cutter-087192","title":"Hypertherm Powermax85 SYNC","description":"\u003cp\u003eThe top of the lineup, built for heavy plate and full production. This system (Hypertherm part #087192) pairs the Powermax85 SYNC power supply, fully equipped for automation with a CPC port, voltage divider and serial port, and a 25 ft 180° SmartSYNC machine torch. Like every plasma cutter from Garage Fab HQ, it comes with our \u003cstrong\u003eGFHQ CNC Com Cable\u003c\/strong\u003e, so you can connect it to your table controller right away.\u003c\/p\u003e\n\n\u003cp\u003eThe Powermax85 SYNC cuts 1\" plate at production speed and handles 1-1\/4\" at 10 inches per minute. Its RFID SmartSYNC torch reads each single-piece cartridge and sets the amperage and mode automatically, so setup errors go away and cartridge changes take seconds. The system tells you when a cartridge is worn out. It also runs on almost any shop power, from 200V to 480V single-phase or 200V to 600V three-phase.\u003c\/p\u003e\n\n\u003ch3\u003eCut Capacity (mild steel)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended: 1\" at 20 inches per minute\u003c\/li\u003e\n\u003cli\u003eAlso cuts 1-1\/4\" at 10 inches per minute\u003c\/li\u003e\n\u003cli\u003eSeverance: 1-1\/2\" at 5 inches per minute\u003c\/li\u003e\n\u003cli\u003ePierce: 3\/4\" (with automatic torch height control)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCPC port, voltage divider and RS-485 serial port for full CNC and torch height control integration\u003c\/li\u003e\n\u003cli\u003eRFID SmartSYNC machine torch and cartridges set amperage and process automatically\u003c\/li\u003e\n\u003cli\u003eSingle-piece cartridges swap in seconds and eliminate part mix-ups\u003c\/li\u003e\n\u003cli\u003eEnd-of-life cartridge detection\u003c\/li\u003e\n\u003cli\u003eWorks on 200–480V single phase or 200–600V three phase\u003c\/li\u003e\n\u003cli\u003eSpringStart technology for consistent, reliable arc starts\u003c\/li\u003e\n\u003cli\u003e92% electrical efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowermax85 SYNC power supply with CPC port, voltage divider and serial port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGFHQ CNC Com Cable\u003c\/strong\u003e (included free with every GFHQ plasma cutter)\u003c\/li\u003e\n\u003cli\u003e180° SmartSYNC machine torch with 25 ft lead\u003c\/li\u003e\n\u003cli\u003eRemote pendant\u003c\/li\u003e\n\u003cli\u003e25 ft work cable with ground clamp\u003c\/li\u003e\n\u003cli\u003eStarter mechanized cartridges\u003c\/li\u003e\n\u003cli\u003eOperator and safety manuals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInput: 200–480V single phase, or 200–600V three phase, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eInput current (240V): 58A single phase \/ 35A three phase\u003c\/li\u003e\n\u003cli\u003eOutput: 25–85A\u003c\/li\u003e\n\u003cli\u003eDuty cycle: 60% at 85A (230–600V three phase); 50% at 85A (240V single phase); 100% at 66A\u003c\/li\u003e\n\u003cli\u003eAir: clean, dry, oil-free air or nitrogen at 7.5 scfm @ 85 psi\u003c\/li\u003e\n\u003cli\u003eDimensions: 19\" D × 9.2\" W × 17\" H\u003c\/li\u003e\n\u003cli\u003eWeight: 67 lb with 25 ft torch\u003c\/li\u003e\n\u003cli\u003eGenerator: 20 kW (25 kVA) for full 85A output\u003c\/li\u003e\n\u003cli\u003eWarranty: 6 years on the power supply, 1 year on the torch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse clean, dry air. Moisture and oil in the air line shorten cartridge life.\u003c\/li\u003e\n\u003cli\u003eSYNC systems only work with SmartSYNC torches; older Powermax85 torches will not connect.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hypertherm","offers":[{"title":"Default Title","offer_id":53056994574647,"sku":"GFHQ-HYP-087192","price":6499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/2422\/9943\/files\/bs_pmx85sync_375x188_2.jpg?v=1790547968","url":"https:\/\/www.garagefabhq.com\/products\/hypertherm-powermax85-sync-cnc-plasma-cutter-087192","provider":"Garage Fab HQ","version":"1.0","type":"link"}