{"product_id":"hypertherm-powermax45-sync-cnc-plasma-cutter-088580","title":"Hypertherm Powermax45 SYNC","description":"\u003cp\u003eHypertherm quality, set up for your plasma table. This system (Hypertherm part #088580) pairs the Powermax45 SYNC power supply, with a built-in CPC port and voltage divider for CNC, and a 25 ft 180° SmartSYNC machine torch. Like every plasma cutter from Garage Fab HQ, it comes with our \u003cstrong\u003eGFHQ CNC Com Cable\u003c\/strong\u003e, so you can connect it to your table controller right away.\u003c\/p\u003e\n\n\u003cp\u003eThe SYNC platform takes the guesswork out of setup. Each single-piece cartridge has an RFID chip, and the torch reads it and sets the correct amperage and mode automatically, with no dials to get wrong. When a cartridge is worn out, the system tells you. Hypertherm rates cartridge life at up to 5 times longer than standard consumables, and the Powermax line is known for running for decades in the field.\u003c\/p\u003e\n\n\u003ch3\u003eCut Capacity (mild steel)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended: 5\/8\" at 20 inches per minute\u003c\/li\u003e\n\u003cli\u003eSeverance: 1-1\/8\" at 5 inches per minute\u003c\/li\u003e\n\u003cli\u003ePierce: 1\/2\" (with automatic torch height control)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCPC port and voltage divider for CNC and torch height control\u003c\/li\u003e\n\u003cli\u003eRFID SmartSYNC torch and cartridges set the amperage and process automatically\u003c\/li\u003e\n\u003cli\u003eSingle-piece cartridges swap in seconds and eliminate part mix-ups\u003c\/li\u003e\n\u003cli\u003eEnd-of-life cartridge detection\u003c\/li\u003e\n\u003cli\u003eAlso cuts, marks and gouges with the right cartridge\u003c\/li\u003e\n\u003cli\u003eSpringStart technology for consistent, reliable arc starts\u003c\/li\u003e\n\u003cli\u003e90% electrical efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowermax45 SYNC power supply with CPC port and voltage divider\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGFHQ CNC Com Cable\u003c\/strong\u003e (included free with every GFHQ plasma cutter)\u003c\/li\u003e\n\u003cli\u003e180° SmartSYNC machine torch with 25 ft lead\u003c\/li\u003e\n\u003cli\u003eWork cable with ground clamp\u003c\/li\u003e\n\u003cli\u003eStarter cartridge\u003c\/li\u003e\n\u003cli\u003eOperator's guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInput: 200–240V, single phase, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eInput current: 39A at 200V \/ 32A at 240V\u003c\/li\u003e\n\u003cli\u003eOutput: 9–45A\u003c\/li\u003e\n\u003cli\u003eDuty cycle: 50% at 45A; 60% at 41A; 100% at 32A\u003c\/li\u003e\n\u003cli\u003eAir: clean, dry, oil-free air at 6.7 scfm @ 90 psi\u003c\/li\u003e\n\u003cli\u003eDimensions: 17.4\" D × 6.8\" W × 14.1\" H\u003c\/li\u003e\n\u003cli\u003eWeight: about 31 lb with a 20 ft torch\u003c\/li\u003e\n\u003cli\u003eGenerator: 12.5 kVA (10 kW) for full 45A output\u003c\/li\u003e\n\u003cli\u003eWarranty: 6 years on the power supply, 1 year on the torch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse clean, dry air. Moisture and oil in the air line shorten cartridge life.\u003c\/li\u003e\n\u003cli\u003eThis is the 200–240V single-phase model.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hypertherm","offers":[{"title":"Default Title","offer_id":53056991068471,"sku":"GFHQ-HYP-088580","price":3649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/2422\/9943\/files\/bs_pmx45sync_notorch-375x188.jpg?v=1790547518","url":"https:\/\/www.garagefabhq.com\/products\/hypertherm-powermax45-sync-cnc-plasma-cutter-088580","provider":"Garage Fab HQ","version":"1.0","type":"link"}