{"product_id":"everlast-powerplasma-82i-cnc-plasma-cutter","title":"Everlast PowerPlasma 82i","description":"\u003cp\u003eBuilt for shops that want real cutting power on the table without outgrowing their machine. This package pairs the Everlast PowerPlasma 82i, an 80-amp IGBT inverter plasma cutter, with a dedicated PTM-80 CNC machine torch, and every plasma cutter from Garage Fab HQ comes with our \u003cstrong\u003eGFHQ CNC Com Cable\u003c\/strong\u003e so you can connect it to your table controller right away.\u003c\/p\u003e\n\n\u003cp\u003eThe 82i handles 5\/8\" plate every day and makes quality cuts through 1\" at slower speeds. It still runs on standard 240V shop power, so it fits right in a home garage as well as a production fab shop. The Italian-designed PTM-80 torch uses a back-striking blowback start for longer consumable life, and it works with both shielded and unshielded consumables. The high-frequency-free start won't interfere with your table's electronics.\u003c\/p\u003e\n\n\u003ch3\u003eCut Capacity (CNC)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 5\/8\" for everyday production cutting (best speed and quality)\u003c\/li\u003e\n\u003cli\u003eUp to 1\" clean cut (edge start)\u003c\/li\u003e\n\u003cli\u003eUp to 1-3\/16\" severance at reduced speed\u003c\/li\u003e\n\u003cli\u003ePierces 1\/2\" to 5\/8\" with automatic torch height control (THC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in CNC interface port for plasma table use\u003c\/li\u003e\n\u003cli\u003e60% duty cycle at 80A; 100% at 63A\u003c\/li\u003e\n\u003cli\u003eBlowback pilot arc start (no high frequency) for rusty and painted metal\u003c\/li\u003e\n\u003cli\u003e3-second pilot arc tip saver\u003c\/li\u003e\n\u003cli\u003eAdjustable post-flow up to 50 seconds for longer torch and consumable life\u003c\/li\u003e\n\u003cli\u003eFront-mounted air pressure gauge and low-air safety\u003c\/li\u003e\n\u003cli\u003eOver-current and duty cycle protection with a warning light\u003c\/li\u003e\n\u003cli\u003eCuts steel, stainless, aluminum, copper, titanium, cast iron and more\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowerPlasma 82i power unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGFHQ CNC Com Cable\u003c\/strong\u003e (included free with every GFHQ plasma cutter)\u003c\/li\u003e\n\u003cli\u003ePTM-80 CNC machine torch with 24 ft lead and Euro-style quick connect\u003c\/li\u003e\n\u003cli\u003eGround clamp\u003c\/li\u003e\n\u003cli\u003eAir pressure regulator \/ water trap\u003c\/li\u003e\n\u003cli\u003e12-pin CNC connector\u003c\/li\u003e\n\u003cli\u003eStarter consumables: 5 electrodes and 5 nozzles (1.2mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eA hand-held torch is not included, but can be purchased separately.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInput: 220\/240V, single phase\u003c\/li\u003e\n\u003cli\u003eOutput: 20–80A\u003c\/li\u003e\n\u003cli\u003eMax input amps: 58A inrush \/ 45.2A rated\u003c\/li\u003e\n\u003cli\u003eRecommended air: 75 psi; compressor 7 CFM @ 90 psi with a 60-gallon tank\u003c\/li\u003e\n\u003cli\u003eDimensions: 25\" × 9.5\" × 15\"\u003c\/li\u003e\n\u003cli\u003eWeight: 53 lb\u003c\/li\u003e\n\u003cli\u003eManufacturer warranty: 5 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA separate inline air dryer is required. The included water trap does not remove all moisture, and wet air shortens consumable life and can damage the torch.\u003c\/li\u003e\n\u003cli\u003eGenerator use requires a \"clean power\" generator rated for at least 15,000 surge watts.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Everlast","offers":[{"title":"Default Title","offer_id":53056987562295,"sku":"GFHQ-PP82i-CNC","price":1749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/2422\/9943\/files\/82bedf9509137f61b6b65f20b95c43d3.png?v=1790547125","url":"https:\/\/www.garagefabhq.com\/products\/everlast-powerplasma-82i-cnc-plasma-cutter","provider":"Garage Fab HQ","version":"1.0","type":"link"}