{"title":"Plasma Cutters","description":"\u003cp\u003ePlasma cutters for the garage and fab shop. Built for clean, fast cuts in steel, aluminum and more.\u003c\/p\u003e","products":[{"product_id":"everlast-powerplasma-62i-cnc-plasma-cutter","title":"Everlast PowerPlasma 62i","description":"\u003cp\u003eGet your plasma table cutting with a machine that's ready to go out of the box. This package pairs the Everlast PowerPlasma 62i, a 60-amp IGBT inverter plasma cutter, with a dedicated CNC machine torch, and we've added our \u003cstrong\u003eGFHQ CNC Com Cable\u003c\/strong\u003e so you can connect it to your table controller right away.\u003c\/p\u003e\n\n\u003cp\u003eIt's light enough to move around the shop and tough enough for everyday production work, whether you're cutting parts on weekends or running a small fab shop. The blowback pilot arc starts without high frequency, so it won't interfere with your table's electronics, and it cuts cleanly through rusty or painted steel. A 3-second tip saver shuts the pilot arc off when you're not cutting, so your consumables last longer.\u003c\/p\u003e\n\n\u003ch3\u003eCut Capacity (CNC)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 3\/8\" for everyday production cutting (best speed and quality)\u003c\/li\u003e\n\u003cli\u003eUp to 3\/4\" clean cut (edge start)\u003c\/li\u003e\n\u003cli\u003eUp to 1\" severance at reduced speed\u003c\/li\u003e\n\u003cli\u003ePierces up to 5\/16\" (edge start recommended at 3\/8\" and thicker)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCNC interface port for plasma table use\u003c\/li\u003e\n\u003cli\u003e60% duty cycle at 60A; 100% at 50A\u003c\/li\u003e\n\u003cli\u003eBlowback pilot arc start (no high frequency)\u003c\/li\u003e\n\u003cli\u003e3-second pilot arc tip saver\u003c\/li\u003e\n\u003cli\u003eAdjustable post-flow timer\u003c\/li\u003e\n\u003cli\u003eFront-mounted air pressure gauge and low-air safety\u003c\/li\u003e\n\u003cli\u003eOver-current and duty cycle protection with a warning light\u003c\/li\u003e\n\u003cli\u003eCuts steel, stainless, aluminum, copper, titanium, cast iron and more\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowerPlasma 62i power unit\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGFHQ CNC Com Cable\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003ePTM-60 CNC machine torch with 24 ft lead and Euro-style quick connect\u003c\/li\u003e\n\u003cli\u003eGround clamp with 10 ft cable\u003c\/li\u003e\n\u003cli\u003eAir pressure regulator \/ water trap\u003c\/li\u003e\n\u003cli\u003eStarter consumables: 5 electrodes and 5 nozzles (1.1mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eA hand-held torch is not included, but can be purchased separately.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInput: 220\/240V, single phase\u003c\/li\u003e\n\u003cli\u003eOutput: 20–60A\u003c\/li\u003e\n\u003cli\u003eMax input amps: 41A inrush \/ 32.4A rated\u003c\/li\u003e\n\u003cli\u003eRecommended air: 75 psi at the torch; compressor 6 CFM @ 90 psi with a 30-gallon tank\u003c\/li\u003e\n\u003cli\u003eDimensions: 25\" × 9.5\" × 15\"\u003c\/li\u003e\n\u003cli\u003eWeight: 53 lb\u003c\/li\u003e\n\u003cli\u003eManufacturer warranty: 5 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA separate inline air dryer is required. The included water trap does not remove all moisture, and wet air shortens consumable life and can damage the torch.\u003c\/li\u003e\n\u003cli\u003eGenerator use requires a \"clean power\" generator rated for at least 10,000 surge watts.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Everlast","offers":[{"title":"Default Title","offer_id":53056973701431,"sku":"GFHQ-PP62i-CNC","price":1499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/2422\/9943\/files\/64fb13060a08a89bdb53373c59c811f9.png?v=1790546798"},{"product_id":"everlast-powerplasma-82i-cnc-plasma-cutter","title":"Everlast PowerPlasma 82i","description":"\u003cp\u003eBuilt for shops that want real cutting power on the table without outgrowing their machine. This package pairs the Everlast PowerPlasma 82i, an 80-amp IGBT inverter plasma cutter, with a dedicated PTM-80 CNC machine torch, and every plasma cutter from Garage Fab HQ comes with our \u003cstrong\u003eGFHQ CNC Com Cable\u003c\/strong\u003e so you can connect it to your table controller right away.\u003c\/p\u003e\n\n\u003cp\u003eThe 82i handles 5\/8\" plate every day and makes quality cuts through 1\" at slower speeds. It still runs on standard 240V shop power, so it fits right in a home garage as well as a production fab shop. The Italian-designed PTM-80 torch uses a back-striking blowback start for longer consumable life, and it works with both shielded and unshielded consumables. The high-frequency-free start won't interfere with your table's electronics.\u003c\/p\u003e\n\n\u003ch3\u003eCut Capacity (CNC)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 5\/8\" for everyday production cutting (best speed and quality)\u003c\/li\u003e\n\u003cli\u003eUp to 1\" clean cut (edge start)\u003c\/li\u003e\n\u003cli\u003eUp to 1-3\/16\" severance at reduced speed\u003c\/li\u003e\n\u003cli\u003ePierces 1\/2\" to 5\/8\" with automatic torch height control (THC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in CNC interface port for plasma table use\u003c\/li\u003e\n\u003cli\u003e60% duty cycle at 80A; 100% at 63A\u003c\/li\u003e\n\u003cli\u003eBlowback pilot arc start (no high frequency) for rusty and painted metal\u003c\/li\u003e\n\u003cli\u003e3-second pilot arc tip saver\u003c\/li\u003e\n\u003cli\u003eAdjustable post-flow up to 50 seconds for longer torch and consumable life\u003c\/li\u003e\n\u003cli\u003eFront-mounted air pressure gauge and low-air safety\u003c\/li\u003e\n\u003cli\u003eOver-current and duty cycle protection with a warning light\u003c\/li\u003e\n\u003cli\u003eCuts steel, stainless, aluminum, copper, titanium, cast iron and more\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowerPlasma 82i power unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGFHQ CNC Com Cable\u003c\/strong\u003e (included free with every GFHQ plasma cutter)\u003c\/li\u003e\n\u003cli\u003ePTM-80 CNC machine torch with 24 ft lead and Euro-style quick connect\u003c\/li\u003e\n\u003cli\u003eGround clamp\u003c\/li\u003e\n\u003cli\u003eAir pressure regulator \/ water trap\u003c\/li\u003e\n\u003cli\u003e12-pin CNC connector\u003c\/li\u003e\n\u003cli\u003eStarter consumables: 5 electrodes and 5 nozzles (1.2mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eA hand-held torch is not included, but can be purchased separately.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInput: 220\/240V, single phase\u003c\/li\u003e\n\u003cli\u003eOutput: 20–80A\u003c\/li\u003e\n\u003cli\u003eMax input amps: 58A inrush \/ 45.2A rated\u003c\/li\u003e\n\u003cli\u003eRecommended air: 75 psi; compressor 7 CFM @ 90 psi with a 60-gallon tank\u003c\/li\u003e\n\u003cli\u003eDimensions: 25\" × 9.5\" × 15\"\u003c\/li\u003e\n\u003cli\u003eWeight: 53 lb\u003c\/li\u003e\n\u003cli\u003eManufacturer warranty: 5 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA separate inline air dryer is required. The included water trap does not remove all moisture, and wet air shortens consumable life and can damage the torch.\u003c\/li\u003e\n\u003cli\u003eGenerator use requires a \"clean power\" generator rated for at least 15,000 surge watts.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Everlast","offers":[{"title":"Default Title","offer_id":53056987562295,"sku":"GFHQ-PP82i-CNC","price":1749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/2422\/9943\/files\/82bedf9509137f61b6b65f20b95c43d3.png?v=1790547125"},{"product_id":"gfhq-custom-cnc-com-cable-plasma-table","title":"CNC Com Cable","description":"\u003cp\u003eThe \u003cstrong\u003eGFHQ Custom Com Cable\u003c\/strong\u003e connects your plasma cutter's CNC port to your plasma table's controller, so your table can start and stop the cut and read the signals it needs.\u003c\/p\u003e\n\n\u003cp\u003eBuilt in-house by Garage Fab HQ, it's the same cable we include free with every plasma cutter we sell. Order it on its own if you already own a plasma cutter, or need a replacement or spare.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eNot sure it'll fit your setup? Contact us with your plasma cutter and table models, and we'll confirm compatibility before you order.\u003c\/em\u003e\u003c\/p\u003e","brand":"Garage Fab HQ","offers":[{"title":"Default Title","offer_id":53056987595063,"sku":"GFHQ-COM-CABLE","price":250.0,"currency_code":"USD","in_stock":true}]},{"product_id":"everlast-powerplasma-102i-cnc-plasma-cutter","title":"Everlast PowerPlasma 102i","description":"\u003cp\u003eThe heavy hitter of the lineup. This package pairs the Everlast PowerPlasma 102i, a 100-amp IGBT inverter plasma cutter, with a dedicated iPTM-100 CNC machine torch for serious plate work on your table. Like every plasma cutter from Garage Fab HQ, it comes with our \u003cstrong\u003eGFHQ CNC Com Cable\u003c\/strong\u003e, so you can connect it to your table controller right away.\u003c\/p\u003e\n\n\u003cp\u003eThe 102i cuts 3\/4\" plate every day and makes quality cuts through 1-1\/8\" at slower speeds. It runs on 240V single-phase or three-phase power, so it fits a well-equipped home shop as well as a commercial fab floor. The Italian-designed iPTM-100 torch uses a back-striking blowback start for longer consumable life, and it works with shielded and unshielded consumables. The high-frequency-free start won't interfere with your table's electronics.\u003c\/p\u003e\n\n\u003ch3\u003eCut Capacity (CNC, mild steel)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 3\/4\" for everyday production cutting (best speed and quality)\u003c\/li\u003e\n\u003cli\u003eUp to 1-1\/8\" clean cut (edge start)\u003c\/li\u003e\n\u003cli\u003eUp to 1-3\/8\" severance at reduced speed\u003c\/li\u003e\n\u003cli\u003ePierces 5\/8\" to 3\/4\" with automatic torch height control (THC)\u003c\/li\u003e\n\u003cli\u003eFor stainless, expect about 25% less capacity; for aluminum, about 40% less\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in CNC interface port for plasma table use\u003c\/li\u003e\n\u003cli\u003e60% duty cycle at 100A; 100% at 80A\u003c\/li\u003e\n\u003cli\u003eRuns on 240V single-phase or three-phase\u003c\/li\u003e\n\u003cli\u003eBlowback pilot arc start (no high frequency) for rusty and painted metal\u003c\/li\u003e\n\u003cli\u003e3-second pilot arc tip saver\u003c\/li\u003e\n\u003cli\u003eAdjustable post-flow up to 50 seconds for longer torch and consumable life\u003c\/li\u003e\n\u003cli\u003eFront-mounted air pressure gauge and low-air safety\u003c\/li\u003e\n\u003cli\u003eOver-current and duty cycle protection with a warning light\u003c\/li\u003e\n\u003cli\u003eCuts steel, stainless, aluminum, copper, titanium, cast iron and more\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowerPlasma 102i power unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGFHQ CNC Com Cable\u003c\/strong\u003e (included free with every GFHQ plasma cutter)\u003c\/li\u003e\n\u003cli\u003eiPTM-100 CNC machine torch with 24 ft lead and Euro-style quick connect\u003c\/li\u003e\n\u003cli\u003eGround clamp\u003c\/li\u003e\n\u003cli\u003eAir filter \/ water trap\u003c\/li\u003e\n\u003cli\u003eStarter consumables: 5 electrodes and 5 nozzles (1.5mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eA hand-held torch is not included, but can be purchased separately.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInput: 220\/240V, single or three phase\u003c\/li\u003e\n\u003cli\u003eOutput: 20–100A\u003c\/li\u003e\n\u003cli\u003eMax input amps (240V single phase): 82A inrush \/ 64A rated\u003c\/li\u003e\n\u003cli\u003eRecommended air: 75 psi; compressor 8 CFM @ 90 psi with a 60-gallon tank\u003c\/li\u003e\n\u003cli\u003eDimensions: 25\" × 9.5\" × 15\"\u003c\/li\u003e\n\u003cli\u003eWeight: 58 lb\u003c\/li\u003e\n\u003cli\u003eManufacturer warranty: 5 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA separate inline air dryer is required. The included water trap does not remove all moisture, and wet air shortens consumable life and can damage the torch.\u003c\/li\u003e\n\u003cli\u003eGenerator use requires a \"clean power\" generator rated for at least 19,000 surge watts.\u003c\/li\u003e\n\u003cli\u003eThis is the 240V version. A 480V three-phase version is also made; contact us if you need it.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Everlast","offers":[{"title":"Default Title","offer_id":53056990904631,"sku":"GFHQ-PP102i-CNC","price":2249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/2422\/9943\/files\/8126d437f491d3c8e33e02d7c021a451.png?v=1790547240"},{"product_id":"hypertherm-powermax45-sync-cnc-plasma-cutter-088580","title":"Hypertherm Powermax45 SYNC","description":"\u003cp\u003eHypertherm quality, set up for your plasma table. This system (Hypertherm part #088580) pairs the Powermax45 SYNC power supply, with a built-in CPC port and voltage divider for CNC, and a 25 ft 180° SmartSYNC machine torch. Like every plasma cutter from Garage Fab HQ, it comes with our \u003cstrong\u003eGFHQ CNC Com Cable\u003c\/strong\u003e, so you can connect it to your table controller right away.\u003c\/p\u003e\n\n\u003cp\u003eThe SYNC platform takes the guesswork out of setup. Each single-piece cartridge has an RFID chip, and the torch reads it and sets the correct amperage and mode automatically, with no dials to get wrong. When a cartridge is worn out, the system tells you. Hypertherm rates cartridge life at up to 5 times longer than standard consumables, and the Powermax line is known for running for decades in the field.\u003c\/p\u003e\n\n\u003ch3\u003eCut Capacity (mild steel)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended: 5\/8\" at 20 inches per minute\u003c\/li\u003e\n\u003cli\u003eSeverance: 1-1\/8\" at 5 inches per minute\u003c\/li\u003e\n\u003cli\u003ePierce: 1\/2\" (with automatic torch height control)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCPC port and voltage divider for CNC and torch height control\u003c\/li\u003e\n\u003cli\u003eRFID SmartSYNC torch and cartridges set the amperage and process automatically\u003c\/li\u003e\n\u003cli\u003eSingle-piece cartridges swap in seconds and eliminate part mix-ups\u003c\/li\u003e\n\u003cli\u003eEnd-of-life cartridge detection\u003c\/li\u003e\n\u003cli\u003eAlso cuts, marks and gouges with the right cartridge\u003c\/li\u003e\n\u003cli\u003eSpringStart technology for consistent, reliable arc starts\u003c\/li\u003e\n\u003cli\u003e90% electrical efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowermax45 SYNC power supply with CPC port and voltage divider\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGFHQ CNC Com Cable\u003c\/strong\u003e (included free with every GFHQ plasma cutter)\u003c\/li\u003e\n\u003cli\u003e180° SmartSYNC machine torch with 25 ft lead\u003c\/li\u003e\n\u003cli\u003eWork cable with ground clamp\u003c\/li\u003e\n\u003cli\u003eStarter cartridge\u003c\/li\u003e\n\u003cli\u003eOperator's guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInput: 200–240V, single phase, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eInput current: 39A at 200V \/ 32A at 240V\u003c\/li\u003e\n\u003cli\u003eOutput: 9–45A\u003c\/li\u003e\n\u003cli\u003eDuty cycle: 50% at 45A; 60% at 41A; 100% at 32A\u003c\/li\u003e\n\u003cli\u003eAir: clean, dry, oil-free air at 6.7 scfm @ 90 psi\u003c\/li\u003e\n\u003cli\u003eDimensions: 17.4\" D × 6.8\" W × 14.1\" H\u003c\/li\u003e\n\u003cli\u003eWeight: about 31 lb with a 20 ft torch\u003c\/li\u003e\n\u003cli\u003eGenerator: 12.5 kVA (10 kW) for full 45A output\u003c\/li\u003e\n\u003cli\u003eWarranty: 6 years on the power supply, 1 year on the torch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse clean, dry air. Moisture and oil in the air line shorten cartridge life.\u003c\/li\u003e\n\u003cli\u003eThis is the 200–240V single-phase model.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hypertherm","offers":[{"title":"Default Title","offer_id":53056991068471,"sku":"GFHQ-HYP-088580","price":3649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/2422\/9943\/files\/bs_pmx45sync_notorch-375x188.jpg?v=1790547518"},{"product_id":"hypertherm-powermax65-sync-cnc-plasma-cutter-083352","title":"Hypertherm Powermax65 SYNC","description":"\u003cp\u003eA professional-grade step up for serious table work. This system (Hypertherm part #083352) pairs the Powermax65 SYNC power supply, fully equipped for automation with a CPC port, voltage divider and serial port, and a 25 ft 180° SmartSYNC machine torch. Like every plasma cutter from Garage Fab HQ, it comes with our \u003cstrong\u003eGFHQ CNC Com Cable\u003c\/strong\u003e, so you can connect it to your table controller right away.\u003c\/p\u003e\n\n\u003cp\u003eThe Powermax65 SYNC cuts 3\/4\" plate at production speed and handles 1\" at 10 inches per minute. Its RFID SmartSYNC torch reads each single-piece cartridge and sets the amperage and mode automatically, so setup errors go away and cartridge changes take seconds. The system tells you when a cartridge is worn out. It also runs on almost any shop power, from 200V to 480V single-phase or 200V to 600V three-phase.\u003c\/p\u003e\n\n\u003ch3\u003eCut Capacity (mild steel)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended: 3\/4\" at 20 inches per minute\u003c\/li\u003e\n\u003cli\u003eAlso cuts 1\" at 10 inches per minute\u003c\/li\u003e\n\u003cli\u003eSeverance: 1-1\/4\" at 5 inches per minute\u003c\/li\u003e\n\u003cli\u003ePierce: 5\/8\" (with automatic torch height control)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCPC port, voltage divider and RS-485 serial port for full CNC and torch height control integration\u003c\/li\u003e\n\u003cli\u003eRFID SmartSYNC machine torch and cartridges set amperage and process automatically\u003c\/li\u003e\n\u003cli\u003eSingle-piece cartridges swap in seconds and eliminate part mix-ups\u003c\/li\u003e\n\u003cli\u003eEnd-of-life cartridge detection\u003c\/li\u003e\n\u003cli\u003eWorks on 200–480V single phase or 200–600V three phase\u003c\/li\u003e\n\u003cli\u003eSpringStart technology for consistent, reliable arc starts\u003c\/li\u003e\n\u003cli\u003e91% electrical efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowermax65 SYNC power supply with CPC port, voltage divider and serial port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGFHQ CNC Com Cable\u003c\/strong\u003e (included free with every GFHQ plasma cutter)\u003c\/li\u003e\n\u003cli\u003e180° SmartSYNC machine torch with 25 ft lead\u003c\/li\u003e\n\u003cli\u003eRemote pendant\u003c\/li\u003e\n\u003cli\u003e25 ft work cable with ground clamp\u003c\/li\u003e\n\u003cli\u003eStarter mechanized cartridges\u003c\/li\u003e\n\u003cli\u003eOperator and safety manuals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInput: 200–480V single phase, or 200–600V three phase, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eInput current (240V): 44A single phase \/ 27A three phase\u003c\/li\u003e\n\u003cli\u003eOutput: 20–65A\u003c\/li\u003e\n\u003cli\u003eDuty cycle: 50% at 65A (230–600V); 100% at 46A\u003c\/li\u003e\n\u003cli\u003eAir: clean, dry, oil-free air or nitrogen at 7.5 scfm @ 85 psi\u003c\/li\u003e\n\u003cli\u003eDimensions: 19\" D × 9.2\" W × 17\" H\u003c\/li\u003e\n\u003cli\u003eWeight: 61.7 lb with 25 ft torch\u003c\/li\u003e\n\u003cli\u003eWarranty: 6 years on the power supply, 1 year on the torch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse clean, dry air. Moisture and oil in the air line shorten cartridge life.\u003c\/li\u003e\n\u003cli\u003eSYNC systems only work with SmartSYNC torches; older Powermax65 torches will not connect.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hypertherm","offers":[{"title":"Default Title","offer_id":53056993362231,"sku":"GFHQ-HYP-083352","price":5249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/2422\/9943\/files\/bs_pmx65sync_375x188_2.jpg?v=1790547813"},{"product_id":"hypertherm-powermax85-sync-cnc-plasma-cutter-087192","title":"Hypertherm Powermax85 SYNC","description":"\u003cp\u003eThe top of the lineup, built for heavy plate and full production. This system (Hypertherm part #087192) pairs the Powermax85 SYNC power supply, fully equipped for automation with a CPC port, voltage divider and serial port, and a 25 ft 180° SmartSYNC machine torch. Like every plasma cutter from Garage Fab HQ, it comes with our \u003cstrong\u003eGFHQ CNC Com Cable\u003c\/strong\u003e, so you can connect it to your table controller right away.\u003c\/p\u003e\n\n\u003cp\u003eThe Powermax85 SYNC cuts 1\" plate at production speed and handles 1-1\/4\" at 10 inches per minute. Its RFID SmartSYNC torch reads each single-piece cartridge and sets the amperage and mode automatically, so setup errors go away and cartridge changes take seconds. The system tells you when a cartridge is worn out. It also runs on almost any shop power, from 200V to 480V single-phase or 200V to 600V three-phase.\u003c\/p\u003e\n\n\u003ch3\u003eCut Capacity (mild steel)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended: 1\" at 20 inches per minute\u003c\/li\u003e\n\u003cli\u003eAlso cuts 1-1\/4\" at 10 inches per minute\u003c\/li\u003e\n\u003cli\u003eSeverance: 1-1\/2\" at 5 inches per minute\u003c\/li\u003e\n\u003cli\u003ePierce: 3\/4\" (with automatic torch height control)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCPC port, voltage divider and RS-485 serial port for full CNC and torch height control integration\u003c\/li\u003e\n\u003cli\u003eRFID SmartSYNC machine torch and cartridges set amperage and process automatically\u003c\/li\u003e\n\u003cli\u003eSingle-piece cartridges swap in seconds and eliminate part mix-ups\u003c\/li\u003e\n\u003cli\u003eEnd-of-life cartridge detection\u003c\/li\u003e\n\u003cli\u003eWorks on 200–480V single phase or 200–600V three phase\u003c\/li\u003e\n\u003cli\u003eSpringStart technology for consistent, reliable arc starts\u003c\/li\u003e\n\u003cli\u003e92% electrical efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowermax85 SYNC power supply with CPC port, voltage divider and serial port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGFHQ CNC Com Cable\u003c\/strong\u003e (included free with every GFHQ plasma cutter)\u003c\/li\u003e\n\u003cli\u003e180° SmartSYNC machine torch with 25 ft lead\u003c\/li\u003e\n\u003cli\u003eRemote pendant\u003c\/li\u003e\n\u003cli\u003e25 ft work cable with ground clamp\u003c\/li\u003e\n\u003cli\u003eStarter mechanized cartridges\u003c\/li\u003e\n\u003cli\u003eOperator and safety manuals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInput: 200–480V single phase, or 200–600V three phase, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eInput current (240V): 58A single phase \/ 35A three phase\u003c\/li\u003e\n\u003cli\u003eOutput: 25–85A\u003c\/li\u003e\n\u003cli\u003eDuty cycle: 60% at 85A (230–600V three phase); 50% at 85A (240V single phase); 100% at 66A\u003c\/li\u003e\n\u003cli\u003eAir: clean, dry, oil-free air or nitrogen at 7.5 scfm @ 85 psi\u003c\/li\u003e\n\u003cli\u003eDimensions: 19\" D × 9.2\" W × 17\" H\u003c\/li\u003e\n\u003cli\u003eWeight: 67 lb with 25 ft torch\u003c\/li\u003e\n\u003cli\u003eGenerator: 20 kW (25 kVA) for full 85A output\u003c\/li\u003e\n\u003cli\u003eWarranty: 6 years on the power supply, 1 year on the torch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse clean, dry air. Moisture and oil in the air line shorten cartridge life.\u003c\/li\u003e\n\u003cli\u003eSYNC systems only work with SmartSYNC torches; older Powermax85 torches will not connect.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hypertherm","offers":[{"title":"Default Title","offer_id":53056994574647,"sku":"GFHQ-HYP-087192","price":6499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/2422\/9943\/files\/bs_pmx85sync_375x188_2.jpg?v=1790547968"}],"url":"https:\/\/www.garagefabhq.com\/collections\/plasma-cutters.oembed","provider":"Garage Fab HQ","version":"1.0","type":"link"}